View TLOM1108_4852167.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TL(RM,RMM,SM,OM,YM)1108(T11)
TOSHIBA LED Lamps
TLRM1108(T11), TLRMM1108(T11), TLSM1108(T11), TLOM1108(T11), TLYM1108(T11)
Panel Circuit Indicator
* * * * * * * * Surface-mount device 3.2 (L) mm x 2.9 (W) mm x 1.9 (H) mm InGaAP LEDs Colors: red, orange, yellow High luminous intensity Standard embossed tape packing: T11 (2000/reel) 4-mm tape reel High operating temperature Topr = -40 to 100C / Tstg=40 to 100C Applications: Instrumental panel Backlighting in Automotive equipment, message signboards, backlighting etc.
Anode index
Unit: mm
Cathode mark
Anode Cathode Cathode Cathode
Color and Material
Part Number TLRM1108 TLRMM1108 TLSM1108 TLOM1108 TLYM1108 Color Red Red Red Orange Yellow InGaAP Material
JEDEC JEITA TOSHIBA Weight: 0.035 g (typ.)
4-3X1
1
2010-01-29
TL(RM,RMM,SM,OM,YM)1108(T11)
Absolute Maximum Ratings (Ta = 25C)
Product Name TLRM1108 TLRMM1108 TLSM1108 TLOM1108 TLYM1108 70 4 203 -40 to 100 -40 to 100 Forward Current IF (mA) Please see Note 1 Reverse Voltage VR (V) Power Dissipation PD (mW) Operation Temperature Topr (C) Storage Temperature Tstg (C)
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Forward current derating
IF - Ta
100
IF (mA) Allowable forward current
80
60
40
20
0 0
20
40
60
80
100
120
Ambient temperature Ta (C)
Electrical Characteristics (Ta = 25C)
Product Name Min TLRM1108 TLRMM1108 TLSM1108 TLOM1108 TLYM1108 Unit 2.2 2.2 2.2 2.2 2.2 Forward Voltage VF Typ. 2.5 2.5 2.5 2.55 2.55 V Max 2.9 2.9 2.9 2.9 2.9 mA A V 50 10 4 IF Reverse Current IR Max VR
2
2010-01-29
TL(RM,RMM,SM,OM,YM)1108(T11)
Optical Characteristics-1 (Ta = 25C)
Product Name TLRM1108 TLRMM1108 TLSM1108 TLOM1108 TLYM1108 Unit Luminous Intensity IV Min 630 630 1000 1000 1000 mcd Typ. 1300 1600 2400 2500 2200 mcd Max 3200 3200 5000 5000 5000 mcd IF 50 50 50 50 50 mA Available Iv rank Please see Note 2 VA / WA / XA VA / WA / XA WA / XA / YA WA / XA / YA WA / XA / YA
Note 2: The specification on the above table is used for Iv classification of LEDs in Toshiba facility. Each reel includes the same rank LEDs. Let the delivery ratio of each rank be unquestioned.
Luminous Intensity IV Min 630 1000 1600 2500 mcd Max 1250 2000 3200 5000 mcd
Rank VA WA XA YA Unit
Optical Characteristics-2 (Ta = 25C)
Emission Spectrum Product Name Peak Emission Wavelength p Min TLRM1108 TLRMM1108 TLSM1108 TLOM1108 TLYM1108 Unit Typ. 644 636 623 612 592 nm Max Typ. 14 14 14 14 13 nm Dominant Wavelength d Min 624 620 607 599 583 Typ. 630 626 613 605 590 nm Max 638 634 621 613 595 mA 50 IF

Handling precautions
* This product is designed as a general display light source usage, and it has applied the measurement standard that matched with the sensitivity of human's eyes. Therefore, it is not intended for usage of functional application (ex. Light source for sensor, optical communication and etc) except general display light source.
3
2010-01-29
TL(RM,RMM,SM,OM,YM)1108(T11)
TLRM1108
IF - V F
100 Ta = 25C 3000
(typ.)
Ta = 25C
IV - IF
(typ.)
30
IV (mcd) Luminous intensity
1.9 2.1 2.3 2.5 2.7 2.9
(mA)
1000
Forward current
IF
10
300
100
3
30
1 1.7
10 1
3
10
30
100
Forward voltage
VF
(V)
Forward current
IF
(mA)
IV - Tc
10 5 3
(typ.)
Wavelength characteristic
1.0 IF = 50 mA Ta = 25C 0.8
(typ.)
IV
Relative luminous intensity
Relative luminous intensity
0.6
1 0.5 0.3
0.4
0.2
0.1 -40
-20
0
20
40
60
80
100
0 580
600
620
640
660
680
700
Case temperature
Tc
(C)
Wavelength
(nm)
Radiation pattern Ta = 25C (typ.)
20 30 40 50 60 70 80 90
10
0
10
20 30 40 50 60 70 80 90 1.0
0
0.2
0.4
0.6
0.8
4
2010-01-29
TL(RM,RMM,SM,OM,YM)1108(T11)
TLRMM1108
IF - V F
100 Ta = 25C 3000 30
(typ.)
Ta = 25C
IV - IF
(typ.)
(mA)
IV (mcd) Luminous intensity
1.9 2.1 2.3 2.5 2.7 2.9
Forward current
IF
1000
10
100
3
30
1 1.7
10 1
3
10
30
100
Forward voltage
VF
(V)
Forward current
IF
(mA)
IV - Tc
10 5
Wavelength characteristic (typ.)
1.0 IF = 50 mA Ta = 25C 0.8
(typ.)
IV
Relative luminous intensity
Relative luminous intensity
3
0.6
1 0.5 0.3
0.4
0.2
0.1 -40
-20
0
20
40
60
80
100
0 580
600
620
640
660
680
700
Case temperature
Tc
(C)
Wavelength
(nm)
Radiation pattern Ta = 25C (typ.)
20 30 40 50 60 70 80 90
10
10
20 30 40 50 60 70 80 90 1.0
0.2
0.4
0.6
0.8
5
2010-01-29
TL(RM,RMM,SM,OM,YM)1108(T11)
TLSM1108
IF - V F
100 Ta = 25C 3000 Ta = 25C
(typ.)
IV - IF
(typ.)
30
IV (mcd) Luminous intensity
1.9 2.1 2.3 2.5 2.7 2.9
(mA)
Forward current
IF
1000
10
300
100
3
30
1 1.7
10 1
3
10
30
100
Forward voltage
VF
(V)
Forward current
IF
(mA)
IV - Tc
10 5 3
(typ.)
Wavelength characteristic
1.0 IF = 50 mA Ta = 25C
(typ.)
IV
Relative luminous intensity
0.8
Relative luminous intensity
0.6
1 0.5 0.3
0.4
0.2
0.1 -40
-20
0
20
40
60
80
100
0 560
580
600
620
640
660
680
Case temperature
Tc
(C)
Wavelength
(nm)
Radiation pattern Ta = 25C (typ.)
20 30 40 50 60 70 80 90
10
0
10
20 30 40 50 60 70 80 90 1.0
0
0.2
0.4
0.6
0.8
6
2010-01-29
TL(RM,RMM,SM,OM,YM)1108(T11)
TLOM1108
IF - V F
100 Ta = 25C 3000
(typ.)
Ta = 25C
IV - IF
(typ.)
30
IV (mcd) Luminous intensity
1.9 2.1 2.3 2.5 2.7 2.9
(mA)
1000
Forward current
IF
10
300
100
3
30
1 1.7
10 1
3
10
30
100
Forward voltage
VF
(V)
Forward current
IF
(mA)
IV - Tc
10 5 3
(typ.)
Wavelength characteristic
1.0 IF = 50 mA Ta = 25C 0.8
(typ.)
IV
Relative luminous intensity
Relative luminous intensity
0.6
1 0.5 0.3
0.4
0.2
0.1 -40
-20
0
20
40
60
80
100
0 540
560
580
600
620
640
660
Case temperature
Tc
(C)
Wavelength
(nm)
Radiation pattern Ta = 25C (typ.)
20 30 40 50 60 70 80 90
10
0
10
20 30 40 50 60 70 80 90 1.0
0
0.2
0.4
0.6
0.8
7
2010-01-29
TL(RM,RMM,SM,OM,YM)1108(T11)
TLYM1108
IF - V F
100 Ta = 25C
(typ.)
Ta = 25C
IV - IF
(typ.)
IV (mcd) Luminous intensity
1.9 2.1 2.3 2.5 2.7 2.9
(mA)
3000
30
IF
1000
Forward current
10
300
100
3
30
1 1.7
Forward voltage
VF
(V)
10 1
3
Forward current
10
IF
30
(mA)
100
IV - Tc
10 5 3
(typ.)
Wavelength characteristic
1.0 IF = 50 mA Ta = 25C
(typ.)
IV
Relative luminous intensity
0.8
Relative luminous intensity
0.6
1 0.5 0.3
0.4
0.2
0.1 -40
-20
0
20
40
60
80
100
0 540
560
580
600
620
640
660
Case temperature
Tc
(C)
Wavelength
(nm)
Radiation pattern Ta = 25C (typ.)
20 30 40 50 60 70 80 90
10
0
10
20 30 40 50 60 70 80 90 1.0
0
0.2
0.4
0.6
0.8
8
2010-01-29
TL(RM,RMM,SM,OM,YM)1108(T11)
Packaging
These LED devices are packed in an aluminum envelope with a silica gel and a moisture indicator to avoid moisture absorption. The optical characteristics of the devices may be affected by exposure to moisture in the air before soldering and they should therefore be stored under the following conditions: 1. This moisture proof bag may be stored unopened within 12 months at the following conditions. Temperature: 5C to 30C Humidity: 90% (max) 2. After opening the moisture proof bag, the devices should be assembled within 4weeks in an environment of 5C to 30C/60% RH or below. 3. If upon opening, the moisture indicator card shows humidity 30% or above (Color of indication changes to pink) or the expiration date has passed, the devices should be baked in taping with reel. After baking, use the baked devices within 72 hours, but perform baking only once. Baking conditions: 605C, for 12 to 24 hours. Expiration date: 12 months from sealing date, which is imprinted on the same side as this label affixed. 4. Repeated baking can cause the peeling strength of the taping to change, then leads to trouble in mounting. Furthermore, prevent the devices from being destructed against static electricity for baking of it. 5. If the packing material of laminate would be broken, the hermeticity would deteriorate. Therefore, do not throw or drop the packed devices.
Mounting Method
Soldering
* Reflow soldering (example)
Temperature profile for Pb soldering (example) 10 s max (*) 240C max Package surface temperature (C) Temperature profile for Pb-free soldering (example) 5 s max(*) 260C max Package surface temperature (C)
(*)
(*)
140 to 160C max(*) 4C/s max
(*)
4C/s max(*) max(*) 150 to 180C 230C 4C/s max(*) 60 to 120 s Time max(*)
4C/s max(*) 60 to 120 s max(*) Time (s)
30 to 50 s max(*) (s)
*
* *
*
The products are evaluated using above reflow soldering conditions. No additional test is performed exceed the condition (i.e. the condition more than (*)MAX values) as a evaluation. Please perform reflow soldering under the above conditions. Please perform the first reflow soldering with reference to the above temperature profile and within 4weeks of opening the package. Second reflow soldering In case of second reflow soldering should be performed within 168 h of the first reflow under the above conditions. Storage conditions before the second reflow soldering: 30C, 60% RH (max) Make any necessary soldering corrections manually. (only once at each soldering point) Soldering iron: 25 W Temperature: 350C or less Time: within 3 s If the products need to be performed by other soldering method (ex. wave soldering), please contact Toshiba sales representative.
*
9
2010-01-29
TL(RM,RMM,SM,OM,YM)1108(T11)
Recommended soldering pattern
Cu area > 16 mm2
Unit: mm Do not use this area for electrical contact. 4.0 1.5 4.0 Cathode
4.0
2.3
0.7 0.8
Anode
1.1
Do not use this area for electrical contact.
10
2010-01-29
TL(RM,RMM,SM,OM,YM)1108(T11)
Cleaning
When cleaning is required after soldering, Toshiba recommends the following cleaning solvents. It is confirmed that these solvents have no effect on semiconductor devices in our dipping test (under the recommended conditions). In selecting the one for your actual usage, please perform sufficient review on washing condition, using condition and etc. ASAHI CLEAN AK-225AES: KAO CLEAN THROUGH 750HS: PINE ALPHA ST-100S: (made by ASAHI GLASS) (made by KAO) (made by ARAKAWA CHEMICAL)
Precautions when Mounting
Do not apply force to the plastic part of the LED under high-temperature conditions. To avoid damaging the LED plastic, do not apply friction using a hard material. When installing the PCB in a product, ensure that the device does not come into contact with other cmponents.
Tape Specifications
1. Product number format
The type of package used for shipment is denoted by a symbol suffix after the product number. The method of classification is as below. (this method, however does not apply to products whose electrical characteristics differ from standard Toshiba specifications) (1) Tape Type: T11 (4-mm pitch) (2) Example
TLSM1108 (T11) Tape type Toshiba product No.
2.
Handling precautions
Tape material protected against static electricity. However, static electricity may occur depending on quantity of charged static electricity and a device may attach to a tape, or a device may be unstable when peeling a tape cover. (a)In process, taping materials may sustain an electrostatic charge, use an ionizer to neutralize the ions. (b)For transport and temporary storage of devices, use containers(boxes, jigs, and bags) that are made of anti-static materials or of materials that dissipate electrostatic electricity.
11
2010-01-29
TL(RM,RMM,SM,OM,YM)1108(T11)
3. Tape dimensions
Unit: mm Symbol D E P0 t F D1 Dimension 1.5 1.75 4.0 0.3 3.5 1.5 Tolerance +0.1/-0 0.1 0.1 0.05 0.05 0.1 Symbol P2 W P A0 B0 K0 Dimension 2.0 8.0 4.0 2.9 3.7 2.3 Tolerance 0.05 0.3 0.1 0.1 0.1 0.1
P0 D P2 E F W t
K0
B0 Polarity
P A0
D1
12
2010-01-29
TL(RM,RMM,SM,OM,YM)1108(T11)
4. Reel dimensions
Unit: mm 9 +1/ -0 11.4 1.0 180 +0 -4
2 0.5
5.
Leader and trailer sections of tape
40 mm or more (Note 1)
40 mm or more (Note 2) Leading part: 190 mm (min)
Note 1: Empty trailer section Note 2: Empty leader section
13
60
44
13
2010-01-29
TL(RM,RMM,SM,OM,YM)1108(T11)
6. Packing form
(1) Packing quantity
Reel Carton 2,000 pcs 10,000 pcs
(2) Packing form: Each reel is sealed in an aluminum pack with silica gel.
7. Label format
(1) Example: TLSM1108 (T11) P/N:
TYPE ADDC
TOSHIBA
TLSM1108
(T11) Q'TY 32C 2,000 pcs 2000
Lot Number Key code for TSB (RANK SYMBOL)
Use under 5-30degC/60%RH in 4weeks
[[G]]/RoHS COMPATIBLE *Y380xxxxxxxxxxxxxxxxxx* SEALED: DIFFUSED IN ***** ASSEMBLED IN *****
(2) Label location
* Reel * Carton
Tape feel direction
Label position Label position * The aluminum package in which the reel is supplied also has the label attached to center of one side.
14
2010-01-29
TL(RM,RMM,SM,OM,YM)1108(T11)
RESTRICTIONS ON PRODUCT USE
* Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. * This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. * Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. * Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact ("Unintended Use"). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. * Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. * Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. * The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. * ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. * GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product. * Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. * Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations.
15
2010-01-29

▲Up To Search▲

Price & Availability of TLOM1108

	To Download TLOM1108 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .